3D effect flower rainbow - faux Pu Leather vinyl - canvas - choose Fabric material Sheets

This material can be cut with scissors, rotary cutter or die cut machine

Choice of material base :
- Hi Quality Leatherette / PU / Faux leather 
Thickness 0.9mm Perfect for making bow or craft , can hold it shape, quality finished
Can be sew , knitted backing
- Hi quality 280gsm canvas fabric, printing is waterproof
Perfect for beginner in bow making or craft , easy to glue and handle fabric.
Not suitable for bag / sewing project

Size A4

We cut our fabric with hand, please allow +/- 10mm difference with our materials

Please note that colours may vary slightly than shown on the screen

If you want continuous bigger size / custom print click here

If you need :
-Bigger size the a4
-Bigger print
-Custom print
CLICK HERE

LATEST SHIPPING INFORMATION -->

UV DTF - for hard object such as glass, bottle acrylic and many more - No need heat

Elevate your cup designs with UV DTF printing!
Bid farewell to intricate layering and weeding.
Not only stunning but waterproof too!
• No need for weeding, just peel and stick! For best results, take
your time making sure to squeegee the design before and
after applying
• Resistant to water and scratches for a long-lasting finish.
• Decals can be applied using the whole wrap or just parts of
the wrap by cutting them before applying them
• Easy to apply
• Handwash only

HOW TO APPLY
• Make sure your surface/substrate is clean, dry, and free from any dirt.
• Use a squeegee across both the front and back of the design to ensure it's primed for peeling.
• Slowly and gradually peel off the transparent film, which should now hold your design.
• Apply your design to the object in the desired position. Please ensure you're content with the placement before proceeding, as repositioning isn't an option.
• Slowly and gently peel away the clear carrier film from the design, completing the application process.
• when applying be careful of film overlapping

DTF transfers are ready-to-press designs that create vibrant, durable prints on cotton, polyester and fabric blends. Best applied using a heat press machine.

DTF Transfer Application Instructions

COTTON

1. Set your heat press to 155°C.
2. Apply medium pressure for best results.
3. Position your garment on the heat press and place the transfer onto the fabric. Cover with parchment paper.
4. Press for 6–7 seconds.
5. Our transfers are hot peel, so remove the film immediately after pressing while still hot.
6. Cover the design again with parchment paper and press for a further 2–3 seconds maximum.
7. Allow 24 hours before washing or stretching the garment.

100% POLYESTER

1. Set your heat press to 135°C.
2. Use light pressure to achieve the best finish and help prevent dye migration.
3. Lay your garment flat on the heat press, position the transfer and cover with parchment paper.
4. Press for 6–7 seconds.
5. Peel away the backing film immediately while hot.
6. Cover with parchment paper and give it a final press for 2–3 seconds maximum.
7. Wait at least 24 hours before washing or stretching the garment.

Cricut, Cricut Mini, and Household Iron (hot peel):

• Temperature: 160 degrees Celsius
• Time: 6-7 seconds
• Pressure: Heavy
• Our transfers are hot peel, so remove the film immediately after pressing while still hot.
• Place Teflon sheet over design
• 2nd press: 2-3 seconds